Tag Archives: DIY Installing

DIY Install Watts Hot Water Recirculation Pump

Today we are going to review the Watts 500800 hot water recirculation pump. I get pretty tired of waiting for hot water whenever I’m trying to wash my hands or take a shower. Especially in the winter months when the water is ice cold coming from the tap. And in my opinion, dumping gallons of water down the drain is not an effective water conservation strategy in drought stricken areas.

 

DIY 3 Way Switch GE Leviton Z-wave Smart Switch Installation

Step by step DIY 3 way switch installation instructions for your GE or Leviton Z-wave smart switch. Smart home automation would not be complete without a 3 way switch. Today we will go through the details of installing a zwave 3 way dimmer switch. The instructions are the same for a non-dimming zwave 3 way switch installation. Light and fans are often controlled with three-way switches, so if you are installing smart switches, this will be a must.

Continue reading DIY 3 Way Switch GE Leviton Z-wave Smart Switch Installation

DIY Installing the Leviton VRS15-1LZ Vizia RF In-Wall Smart Switch

Step by step DIY installation instructions for the Leviton VRS15-1LZ In-Wall Smart Switch. This zwave wall switch is an elegant addition to your home automation project and it connects easily to your Wink Hub or SmartThings controller.

Continue reading DIY Installing the Leviton VRS15-1LZ Vizia RF In-Wall Smart Switch

GE Add-On Switch for Z-Wave 12723

  • Provides ultimate flexibility with your GE in-wall smart switch, dimmer or fan control
  • Requires a GE home automation switch, not a standalone switch
  • Includes white and light almond paddles that will match most standard wall plates (wall Plate not included)
  • Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads (neutral connection required for installation)
  • Compatible with GE in-wall z-wave, Bluetooth, and ZigBee switches, dimmers and fan controls