Tag Archives: Wink

Zooz Z-Wave Plus Toggle Dimmer Light Switch ZEN24

  • FAST Z-WAVE: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately).
  • DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present.
  • SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure.
  • SIMPLY COMPATIBLE: Based on the universal binary switch command class – supported by most Z-Wave controllers. Z-Wave Plus certified > better range and communication speed.
  • QUICK INSTALLATION: Just tap the UPPER paddle 3 times while the hub is inclusion mode to add to your network. Follow wiring instructions carefully. NEUTRAL WIRE REQUIRED!

Zooz Z-Wave Plus Toggle On Off Wall Switch ZEN23

  • FAST Z-WAVE: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately).
  • DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present.
  • SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure.
  • SIMPLY COMPATIBLE: Based on the universal binary switch command class – supported by most Z-Wave controllers. Z-Wave Plus certified > better range and communication speed.
  • QUICK INSTALLATION: Just tap the UPPER paddle 3 times while the hub is inclusion mode to add to your network. Follow wiring instructions carefully. NEUTRAL WIRE REQUIRED!

Zooz Z-Wave Plus On Off Wall Switch ZEN21

  • FAST Z-WAVE: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately).
  • DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present.
  • SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure.
  • SIMPLY COMPATIBLE: Based on the universal binary switch command class – supported by most Z-Wave controllers. Z-Wave Plus certified > better range and communication speed.
  • QUICK INSTALLATION: Just tap the UPPER paddle 3 times while the hub is inclusion mode to add to your network. Follow wiring instructions carefully. NEUTRAL WIRE REQUIRED!

How to Start Your Smart Home: Part 1 -Using the Wink and SmartThings Hubs for Home Automation Tech

The smart home is growing in popularity. This video helps you start your smart home by helping you create a solid plan. Home automation is about more than just the gadgets. Sure you can go out and buy an Amazon Echo or a Google Home and stitch together a few devices. But if you want a real smart home, you need to look at a smart home hub. The video will make the case for a real hub, and discuss lighting options for your new automation experience.

Continue reading How to Start Your Smart Home: Part 1 -Using the Wink and SmartThings Hubs for Home Automation Tech

The New Amazon Echo Dot (Gen 2) Setup & Review – Smarthome & Bluetooth & Wink Hub Integration

The Amazon Echo Dot version 2 point 0 has just been released. Today we are going to add three of them into my house and see how these little guys can improve my Alexa experience. Stay tuned.

Continue reading The New Amazon Echo Dot (Gen 2) Setup & Review – Smarthome & Bluetooth & Wink Hub Integration

EcoLink PIRZWAVE2-ECO Zwave Indoor Motion Sensor Install for Occupancy Detection

When most people think about motion detection, they think of the security aspect. While this is an important factor, we are going to explore motion detection for automation and control. In my video about the smart garage door opener, I showed you a robot that turns on my garage light when the garage door opens.

Continue reading EcoLink PIRZWAVE2-ECO Zwave Indoor Motion Sensor Install for Occupancy Detection

EcoLink Zwave Passive Infrared (PIR) Motion Sensor

  • Remotely monitor movement inside your home with Simply installation and setup – no drilling required.
  • Pet forgiveness allows for three different modes controlled by internal jumper
  • Compatible Controllers: SmartThings, Staples Connect, Vera, HomeSeer, Nexia and Piper
  • Includes 3V CR123A Battery which can last up to 6 years

Compatible with Wink when used as a Zwave Sensor